MIL-DTL-26482 MIL-C-26482 connectors

These are a family of miniature circular connectors based on the MIL-DTL-26482 form factor. These are for use in demanding and rugged applications such as military and commercial, especially where a higher contact density connector is required. Please call our unbiased specialists at NYK Component Solutions who can advise and supply from a number of our trusted OEM suppliers. Style Variants MIL-DTL-26482, SERIES I Description: high density bayonet coupling meeting the MIL-DTL-26482 specification and intermateable with VG95328 specified connectors. MIL-DTL-26482, SERIES II Description: the body features standard military threads allowing application of a broad range of standard endbells and accessories.

MIL-DTL-26482 connectors

Couplings Bayonet Contacts Solder Crimp, front or rear release. Contact Arrangements as defined in MIL-DTL-26482 Body Platings Cadmium Olive Drab Black Zinc Cobalt Electro-less Nickel Mounting variants Cable Through Bulkhead Box mount Jam nut Hermetic options.
MIL-DTL-26482 connectors Enquire Enquire

Did you know?

MIL-DTL-26482 connectors are available in commercial variants and are commonly used in applications where higher density contacts are required in harsh environments. Select the Series II variants for the broadest range of accessories, which NYK   Component Solutions will be happy to advise upon and supply.
Enquire Enquire NYK Component Solutions | 5 Mill Court, The Sawmills, Durley, Hampshire, SO32 2EJ | Tel: +44 1489 861 378 | Email: sales@nykcs.com                         � NYK Component Solutions 2016
Telephone +44 1489 861 378 EMAIL US

How to Order a MIL-DTL-26482 connector.

1.  The MIL-DTL-26482 connector is available in two series with both solder and crimp contacts. Select the right part ordering system and tables below. MIL-DTL-26482 series 1 SOLDER contacts, MIL-DTL-26482 series 1 FRONT RELEASE CRIMP contacts,  or MIL-DTL-26482 series 1 REAR RELEASE CRIMP contacts. 2. How and where will this connector be used? Select your Shell Style  3. What environment will this connector be used in ? Select your Service Class. 3. What is your electrical requirement? Define your Shell Size, this will be dictated by your circuit demands so therefore your Contact Arrangement (see the INSERT CONFIGURATION by SHELL SIZE tables) 4. Which half of your circuit is active? This will define your Contact Style, i.e. whether your connector should have Pins or Sockets. 5. Do you need to prevent mis-mating with similar neighbour connectors? Define if your connector needs a Polarising Position. 6. finally, what Finish do you want your connector body to be? The tables below will assist you to construct an official MIL spec part number for a MIL-DTL-26482  connector. Many of the connector OEM’s have their own proprietary part numbers which we can cross reference to from the Mil part numbers. NYK Component Solutions are distributors for the industry leading connector OEM’s and we can provide unbiased advice for you to meet your technical and logistical requirements.
MS3113  H  12        C         10           A              P           W           T MS3113 H 12 C 10 A P W T Shell &  Contact Style Service  Class Shell  Size Termination  Type / Shell  Material Contact  Arrangement  Insert Arrangement  for Shielded Contacts Contact Style Polarization Finish 8, 10, 12,  14, 16, 18,  20, 22,24 class H  connectors  only, use  dash (-) for  all others omit if not applicable P  pin contacts  S  socket contacts BLANK  (normal),  W, X, Y, Z MIL-DTL-26482 Series I                           SOLDER MS3120  E    22  -   55        A           P            W            T  MS3120 E 22 55 A P W T Shell &  Contact Style Service  Class Shell  Size Contact  Arrangement  Insert  Arrangement  for Shielded  Contacts Contact Style Polarization Finish 8, 10, 12,  14, 16, 18,  20, 22,24 omit if not  applicable P  pin contacts  S  socket contacts BLANK  (normal),  W, X, Y, Z MIL-DTL-26482 Series I                           CRIMP FRONT RELEASE MS3449  H   22       C         55           P              X  MS3449 H 22 C 55 P X Shell &  Contact Style Service  Class Shell  Size Termination  Type / Shell  Material Contact  Arrangement  Contact Style Polarization 8, 10, 12,  14, 16, 18,  20, 22,24 class H  connectors  only, use  dash (-) for  all others A  less pin contacts B  less socket contacts P  pin contacts  S  socket contacts BLANK  (normal),  W, X, Y, Z MIL-DTL-26482 Series 2                           CRIMP REAR RELEASE SHELL STYLE, MIL-DTL-26482 series 1 SOLDER MS No. DESCRIPTION AVAILABLE IN CLASS MS3110 wall mount receptacle E,F,J,P MS3111 in-line receptacle E,F,J,P MS3112 box mount receptacle E MS3113 hermetic seal solder mount receptacle H MS3114 jam nut receptacle E,F,J,P MS3116 straight plug E,F,J,P MS3119 thru-bulkhead receptacle E SERVICE CLASS - MIL-DTL-26482 SERIES 1 SOLDER CLASS DESCRIPTION MATERIAL FINISH TEMPERATURE A general duty, threaded backshell aluminium  cadmium, olive drab, 48 hour, salt spray -55degC - 125degdegC B general duty with strain relief clamp aluminium  cadmium, olive drab, 48 hour, salt spray -55degC - 125degdegC E environmental aluminium  cadmium, olive drab, 48 hour, salt spray -55degC - 125degdegC F environmental with strain relief aluminium  cadmium, olive drab, 48 hour, salt spray -55degC - 125degdegC H hermetic -55degC - 125degdegC J cable seal with clamp aluminium  cadmium, olive drab, 48 hour, salt spray -55degC - 125degdegC P potting seal aluminium  cadmium, olive drab, 48 hour, salt spray -55degC - 125degdegC see FINISH table HERMETIC TERMINATION TYPE - MIL-DTL-26482 SERIES 1 SOLDER CODE TERMINATION TYPE MATERIAL FINISH A solder cup, stainless steel shell passivated B eyelet, stainless steel shell passivated C solder cup, ferrous alloy steel tinned Y eyelet, ferrous alloy shell tinned FINISH - MIL-DTL-26482 SERIES 1 SOLDER FINISH MATERIAL FINISH TEMPERATURE D aluminium pure electrodeposited  aluminium 500hr salt spray -65degC - 175degdegC T aluminium nickel flurocarbon polymer, 500hr, salt spray -65degC - 175degdegC W aluminium cadmium, olive drab -65degC - 175degdegC K aluminium zinc nickle, 500hr, salt spray -65degC - 175degdegC SHELL STYLE, MIL-DTL-26482 series 1 CRIMP FRONT RELEASE MS No. DESCRIPTION AVAILABLE IN CLASS MS3120 wall mount receptacle E,F,P MS3121 in-line receptacle E,F,P MS3122 box mount receptacle E MS3124 jam nut receptacle E,F,P MS3126 straight plug E,F,P MS3127 large flange box mount receptacle E MS3128 large flange wall mount receptacle E,F,P CLASS DESCRIPTION MATERIAL FINISH TEMPERATURE E environmental aluminium  cadmium, olive drab, 48 hour, salt spray -55degC - 125degdegC F environmental with strain relief aluminium  cadmium, olive drab, 48 hour, salt spray -55degC - 125degdegC P potting seal aluminium  cadmium, olive drab, 48 hour, salt spray -55degC - 125degdegC SERVICE CLASS - MIL-DTL-26482 series 1 CRIMP FRONT RELEASE FINISH - MIL-DTL-26482 series 1 CRIMP FRONT RELEASE FINISH MATERIAL FINISH TEMPERATURE D aluminium pure electrodeposited  aluminium 500hr salt spray -65degC - 175degdegC T aluminium nickel flurocarbon polymer, 500hr, salt spray -65degC - 175degdegC W aluminium cadmium, olive drab -65degC - 175degdegC K aluminium zinc nickle, 500hr, salt spray -65degC - 175degdegC SHELL STYLE, MIL-DTL-26482 series 2 CRIMP REAR RELEASE MS No. DESCRIPTION AVAILABLE IN CLASS MS3440 hermetic seal box mount receptacle H MS3442 wide flange hermetic seal box mount receptacle H MS3443 hermetic seal solder mount receptacle H MS3449 hermetic seal jam nut receptacle H MS3470 wall mount receptacle A,D,E,H,L,N,T,W,Z MS3471 in-line receptacle A,D,E,H,L,N,T,W,Z MS3472 wide flange wall mount receptacle A,D,E,H,L,N,T,W,Z MS3473 hermetic seal solder mount receptacle N MS3474 jam nut receptacle A,D,E,H,L,N,T,W,Z MS3475 straight plug (RFI grounding) A,D,E,H,L,N,T,W,Z MS3476 straight plug A,D,E,H,L,N,T,W,Z MS3477 hermetic seal box mount receptacle N MS3479 hermetic seal jam nut receptacle N class N are crimp termination SERVICE CLASS - MIL-DTL-26482 series 2 CRIMP REAR RELEASE CLASS DESCRIPTION MATERIAL FINISH TEMPERATURE A environmental aluminium  black anodized, non-conductive -65degC - 200degdegC D environmental aluminium  pure electrodeposited aluminium, 500 hour salt spray -65degC - 175degdegC H hermetic type A and type B stainless steel passivated  -65degC - 175degdegC H hermetic type C steel tinned -65degC - 175degdegC L environmental aluminium  electroless nickle, 500 hour salt spray -65degC - 200degdegC N hermetic steel tinned -65degC - 175degdegC T environmental aluminium  nickel flourocarbon polymer, 500 hour salt spray -65degC - 175degdegC W environmental aluminium  cadmium, olice drab, 500 hours salt spray -65degC - 175degdegC Z environmental aluminium  zinc nickel, 500 hours salt spray -65degC - 175degdegC CODE TERMINATION TYPE MATERIAL FINISH A solder cup, stainless steel shell passivated B eyelet, stainless steel shell passivated C solder cup, ferrous alloy steel tinned D crimp, ferrous alloy shell - class N only tinned HERMETIC TERMINATION TYPE - MIL-DTL-26482 series 2 CRIMP REAR RELEASE
For insert arrangements, number of contacts and polarisation options please see the MIL-DTL-26482 INSERT CONFIGURATIONS by SHELL SIZE tables page.
For insert arrangements, number of contacts and polarisation options please see the MIL-DTL-26482 INSERT CONFIGURATIONS by SHELL SIZE tables page.
For insert arrangements, number of contacts and polarisation options please see the MIL-DTL-26482 INSERT CONFIGURATIONS by SHELL SIZE tables page.
Need accessories? …
Download Brochure MIL DTL 26482 Series I Solder Download Brochure MIL DTL 26482 Series II Crimp Rear Release Download Brochure MIL DTL 26482 Series I Crimp Front Release

MIL-DTL-26482 MIL-

C-26482 connectors

These are a family of miniature circular connectors based on the MIL-DTL-26482 form factor. These are for use in demanding and rugged applications such as military and commercial, especially where a higher contact density connector is required. Please call our unbiased specialists at NYK Component Solutions who can advise and supply from a number of our trusted OEM suppliers. Style Variants MIL-DTL-26482, SERIES I Description: high density bayonet coupling meeting the MIL-DTL-26482 specification and intermateable with VG95328 specified connectors. MIL-DTL-26482, SERIES II Description: the body features standard military threads allowing application of a broad range of standard endbells and accessories.
Enquire Enquire

MIL-DTL-26482

connectors

Couplings Bayonet Contacts Solder Crimp, front or rear release. Contact Arrangements as defined in MIL-DTL- 26482 Body Platings Cadmium Olive Drab Black Zinc Cobalt Electro-less Nickel Mounting variants Cable Through Bulkhead Box mount Jam nut Hermetic options.
MIL-DTL-38999 connectors Enquire Enquire

Did you know?

MIL-DTL-26482 connectors are available in commercial variants and are commonly used in applications where higher density contacts are required in harsh environments. Select the Series II variants for the broadest range of accessories, which NYK   Component Solutions will be happy to advise upon and supply.
NYK Component Solutions
NYK Component Solutions 5 Mill Court, The Sawmills, Durley, Hampshire, SO32 2EJ Tel: +44 1489 861 378 Email: sales@nykcs.com  © NYK Component Solutions 2016
T +44 1489 861 378 EMAIL US