MIL-DTL-5015 MIL-C-5015 connectors

These are a family of heavy duty circular connectors based on the MIL-DTL-5015 form factor. They are designed for use in demanding and rugged applications in both the military and commercial sectors and used primarily for their ease of engagement and disengagement, with an ability to house different types of contacts. Please call our unbiased specialists at NYK Component Solutions who can advise and supply from a number of our trusted OEM suppliers. Style Variants MIL-DTL-5015, SERIES I Description: solder type contacts MIL-DTL-5015, SERIES II Description: front removable crimp type contacts MIL-DTL-5015, SERIES III Description: rear removable crimp type contacts

MIL-DTL-5015 connectors

Couplings Threaded Bayonet Contacts Solder Crimp Printed Circuit Board Thermocouple Contact Arrangements as defined in MIL-DTL-5015 Body Platings Cadmium Olive Drab Zinc Cobalt Electro-less Nickel Mounting variants Panel Box Jamb nut Stand offs

Did you know?

MIL-DTL-5015 connectors are one of the earliest military specified connectors and the commercial versions are now widely used where ruggedness and long life is required.
Enquire Enquire NYK Component Solutions | 5 Mill Court, The Sawmills, Durley, Hampshire, SO32 2EJ | Tel: +44 1489 861 378 | Email: sales@nykcs.com                         � NYK Component Solutions 2016
Telephone +44 1489 861 378 EMAIL US

How to Order a MIL-DTL-5015 connector.

1. How and where will this connector be used? Select your Shell Style  2. What environment will this connector be used in ? Select your Service Class. 3. What is your electrical requirement? Define your Shell Size, this will be dictated by your circuit demands so therefore your Contact Arrangement 4. Which half of your circuit is active? This will define your Contact Style, i.e. whether your connector should have Pins or Sockets. There are three tables below, use the correct table depending upon if your contacts are Series I solder type, Series II crimp front release, or Series III crimp rear release. 5. Do you need to prevent mis-mating with similar neighbour connectors? Define if your connector needs a Polarising Position. The tables below will assist you to construct an official MIL spec part number for a MIL-DTL-5015 connector. Many of the connector OEM’s have their own proprietary part numbers which we can cross reference to from the Mil part numbers. NYK Component Solutions are distributors for the industry leading connector OEM’s and we can provide unbiased advice for you to meet your technical and logistical requirements. Don’t Forget ! …. please contact the product specialists and account managers at NYK should you require any advice. We are here to help.
MS    3106    A       28    -  21        P       W MS 3106 A 28 -          21 P W Military  Prefix  Shell  Style Service  Class Shell  Size Contact  Arrangement  Contact  Style Polarizing  Position MIL-DTL-5015 Series I                            solder MIL-DTL-5015 Series 1 Solder ORDERING INFORMATION SHELL STYLE MS3100 wall mount receptacle MS3101 in-line receptacle MS3102 box mount receptacle MS3103 wall mount receptacle, potting seal MS3106 straight plug MS3107 quick disconnect plug NS3108 90 degree angle plug MS3142 box mount receptacle, hermetic seal MS3143 solder mount receptacle, hermetic seal MS3436 straight plug MS3507 quick disconnect plug MS25183 straight plug, potting seal MS25183A straight plug, potting seal, with ground plug SERVICE CLASS CLASS DESCRIPTION MATERIAL FINISH TEMP A solid shell, non-environmental aluminium alloy cadmium, olive drab, 96 hour salt spray 125 degC B split shell, non-environmental aluminium alloy cadmium, olive drab, 96 hour salt spray 126 degC C pressurized aluminium alloy cadmium, olive drab, 96 hour salt spray 127 degC E environmental, superseded by R or F aluminium alloy cadmium, olive drab, 96 hour salt spray 128 degC F R type with strain relief aluminium alloy cadmium, olive drab, 96 hour salt spray 129 degC H hermetic steel cadmium, olive drab, 96 hour salt spray 130 degC K firewall steel cadmium, olive drab, 96 hour salt spray 131 degC M replaced by class E  -  - 132 degC PR replaced by class C  -  - 133 degC R environmental grommet seal aluminium alloy cadmium, olive drab, 96 hour salt spray 134 degC SHELL SIZE refer to MIL-DTL-5015 specification (Insert Configurations by Shell Size page on NYK Component Solutions website) CONTACT ARRANGEMENT refer to MIL-DTL-5015 specification (Insert Configurations by Shell Size page on NYK Component Solutions website) CONTACT STYLE P pin contact S socket contact POLARIZING POSITION BLANK (Normal), W, X, Y, Z
For SHELL SIZE and CONTACT ARRANGEMENT see the Insert Configurations by Shell Size page.
MS    3406    D        S        28      -  21       P        Y MS 3406 D S 28  -        21 P Y Military  Prefix  Shell  Style Service  Class Shell  Material Shell  Size Contact  Arrangement  Contact  Style Polarizing  Position MIL-DTL-5015 Series II                      crimp front release MIL-DTL-5015 Series II Crimp Front Release ORDERING INFORMATION SHELL STYLE MS3400 wall mount receptacle MS3401 in-line receptacle MS3402 box mount receptacle MS3404 jam nut receptacle MS3406 straight plug MS3408 90 degree plug NS3409 45 degree plug MS3412 box mount receptacle with threaded rear skirt SERVICE CLASS CLASS CODE MATERIAL FINISH APPLICATION TEMP D Blank wrought aluminium cadmium, olive drab, 500 hour salt spray high shock  -55 +175 degC DJ Blank wrought aluminium cadmium, olive drab, 500 hour salt spray high shock env.  -55 +175 degC DJ S stainless cadmium, black high shock env.  -55 +175 degC D S stainless cadmium, black high shock  -55 +175 degC K Blank carbon steel electroless nickel firewall  -55 +175 degC K S stainless passivated firewall  -55 +175 degC K T carbon steel cadmium, olive drab, 96 hour firewall  -55 +175 degC L Blank aluminium electroless nickel high temperature  -55 +200 degC L S stainless passivated high temperature  -55 +200 degC U Blank aluminium electroless nickel high temperature  -55 +200 degC U S stainless passivated high temperature  -55 +200 degC W Blank aluminium cadmium, olive drab, 500 hour salt spray general purpose  -55 +175 degC SHELL SIZE refer to MIL-DTL-5015 specification (Insert Configurations by Shell Size page on NYK Component Solutions website) CONTACT ARRANGEMENT refer to MIL-DTL-5015 specification (Insert Configurations by Shell Size page on NYK Component Solutions website) CONTACT STYLE A pin inserts, less contacts B socket insert, less contacts P pin contacts S socket contacts POLARIZING POSITION BLANK  (Normal),  W, X, Y, Z
For SHELL SIZE and CONTACT ARRANGEMENT see the Insert Configurations by Shell Size page.
MS    3450    K        S        28      -  21       P        Y MS 3450 K S 28  -        21 P Y Military  Prefix  Shell  Style Service  Class Shell  Material Shell  Size Contact  Arrangement  Contact  Style Polarizing  Position MIL-DTL-5015 Series III                      crimp rear release MIL-DTL-5015 Series III Crimp Rear Release ORDERING INFORMATION SHELL STYLE MS3450 wall mount receptacle MS3451 in-line receptacle MS3452 box mount receptacle MS3454 jam nut receptacle MS3456 straight plug NS3459 straight plug, self-locking coupling nut SERVICE CLASS CLASS CODE MATERIAL FINISH APPLICATION TEMP K T carbon steel electroless nickel firewall  -55 +175 degC KS S stainless passivated firewall  -55 +175 degC KT T carbon steel cadmium olive drab. 96 hour firewall  -55 +175 degC L Blank aluminium electroless nickel high temperature  -55 +200 degC LS S stainless passivated high temperature  -55 +200 degC U Blank aluminium electroless nickel high temperature  -55 +200 degC US S stainless passivated high temperature  -55 +200 degC W Blank aluminium cadmium olive drab. 96 hour general purpose  -55 +175 degC SHELL SIZE refer to MIL-DTL-5015 specification (Insert Configurations by Shell Size page on NYK Component Solutions website) CONTACT ARRANGEMENT refer to MIL-DTL-5015 specification (Insert Configurations by Shell Size page on NYK Component Solutions website) CONTACT STYLE A pin inserts, less contacts B socket insert, less contacts P pin contacts S socket contacts POLARIZING POSITION BLANK  (Normal),  W, X, Y, Z
For SHELL SIZE and CONTACT ARRANGEMENT see the Insert Configurations by Shell Size page.
Need accessories? …

How to Order MIL-DTL-5015 Series I Solder

How to Order MIL-DTL-5015 Series II Crimp Front Release

How to Order MIL-DTL-5015 Series III Crimp Rear Release

Enquire Download Brochure MIL DTL 5015 Series I Solder Download Brochure MIL DTL 5015 Series II Crimp Front Release Download Brochure MIL DTL 5015 Series III Crimp Rear Release

MIL-DTL-5015 MIL-

C-5015 connectors

These are a family of heavy duty circular connectors based on the MIL-DTL-5015 form factor. They are designed for use in demanding and rugged applications in both the military and commercial sectors and used primarily for their ease of engagement and disengagement, with an ability to house different types of contacts. Please call our unbiased specialists at NYK Component Solutions who can advise and supply from a number of our trusted OEM suppliers. Style Variants MIL-DTL-5015, SERIES I Description: solder type contacts MIL-DTL-5015, SERIES II Description: front removable crimp type contacts MIL-DTL-5015, SERIES III Description: rear removable crimp type contacts

HOW TO ORDER MIL-DTL-5015 products.

You are viewing this page on a mobile device, please view this page in full-screen to see full instructions and information to enable you to construct a MIL part number for these products. The account managers at NYK can assist you further if required.
Enquire Enquire

MIL-DTL-5015

connectors

Couplings Threaded Bayonet Contacts Solder Crimp Printed Circuit Board Thermocouple Contact Arrangements as defined in MIL-DTL- 5015 Body Platings Cadmium Olive Drab Zinc Cobalt Electro-less Nickel Mounting variants Panel Box Jamb nut Stand offs
MIL-DTL-38999 connectors Enquire Enquire

Did you know?

MIL-DTL-5015 connectors are one of the earliest military specified connectors and the commercial versions are now widely used where ruggedness and long life is required.
NYK Component Solutions
NYK Component Solutions 5 Mill Court, The Sawmills, Durley, Hampshire, SO32 2EJ Tel: +44 1489 861 378 Email: sales@nykcs.com  © NYK Component Solutions 2016
T +44 1489 861 378 EMAIL US
Download Brochure MIL DTL 5015 Series I Solder Download Brochure MIL DTL 5015 Series II Crimp Front Release Download Brochure MIL DTL 5015 Series III Crimp Rear Release