Accessories

We provide complimentary adapters, protective covers, cable clamps and other connector accessories used primarily in the Aerospace & Defence Industry. Adapters offered range from simple strain relief’s to submersible EMI/RFI shielded backshells for use in harsh environments. Protective covers, used to safeguard connectors while not in use, are available with a wide array of lanyards, eyelets and security rings for complete customization. Our line of MS3057 Cable Clamps are widely used in automotive and heavy industrial markets and are available in a multitude of finishes.

Non-Environmental Backshells

Overview: Non-Environmental Backshells are used when there is a requirement for additional space between the rear of the connector and the strain relief to allow for cable service loops, jumping, filter networks, etc. They provide a mechanical strain relief for non-environmental applications.

Did you know?

Your project will not be complete or meet the requirements of your end customer specifications unless they are provided with the correct compatible accessories. Don’t forget to ask NYK Component Solutions to define and quote the correct accessories for your application.

Environmental Backshells

Overview: Environmental Backshells protect the wiring side of the connector from dust, dirt, moisture and fluids. Almost all recent Military Specification cylindrical connectors are designed so that when the wires are inserted through the grommet, and assuming all holes in the grommet contain either a wire or a sealing plug, the connector will be environmentally sealed once the backshell or strain relief is secured.
connector accessories

EMI/RFI Non-Environmental Backshells

Overview: Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) generate interference. When strong external noise fields exist, the conductors of a cable act as antennas and pick up the radiated signals. The reception of this interference results in inaccurate or interrupted data transmission. An effective shield prevents the reception of undesired signals as well as confining extraneous signals generated within the cable itself. EMI/RFI backshells enclose the cable in a tightly woven metal braid comprised of wire strands which is then terminated at one or both ends of the cable to ground potential. The termination and grounding of the shield is accomplished by using a suitable connector backshell. A variety of backshell configurations are available for termination of cable shielding
connector accessories Enquire Enquire

EMI/RFI Environmental Backshells

Overview: Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) generate interference. When strong external noise fields exist, the conductors of a cable act as antennas and pick up the radiated signals. The reception of this interference results in inaccurate or interrupted data transmission. An effective shield prevents the reception on undesired signals as well as confining extraneous signals generated within the cable itself. EMI/RFI Backshells enclose the cable in a tightly woven metal braid comprised of wire strands which is then terminated at one or both ends of the cable to ground potential. The termination and grounding of the shield is accomplished by using a suitable connector backshell. A variety of backshell configurations are available for termination of cable shielding.
connector accessories Enquire Enquire

M85049/128 TERMINATION BANDS for use

with circular adapters

Overview: We provide Government QPL'd manufactured M85049/128 Termination Bands. These bands are commonly used to attach a braid or a shield to a backshell to provide EMI/RFI shielding. They are available in different lengths, widths, and styles. Our Termination Bands work seamlessly with Daniels Tooling.
connector accessories Enquire Enquire

MS3057 STYLE A, B, C & D CABLE CLAMPS

Overview: Our MS3057 style cable clamps have MS 'V' Threads that will provide strain relief for MIL-DTL-5015 Solder (style A) connectors. These clamps are used heavily in the automotive and heavy industrial markets. They are available in a wide variety of finishes including Cadmium Olive Drab, Electroless Nickel, Black or Green Zinc Cobalt and more.
connector accessories Enquire Enquire

PROTECTIVE COVERS FOR CIRCULAR

CONNECTORS

Overview: Our full line of Protective Covers provide moisture and dust protection for almost every circular mil-spec connector. Available with a wide selection of lanyard types and lengths. Security rings and eyelets of all sizes are also available.
connector accessories Enquire Enquire

MS3420 BUSHINGS (WITH FLANGE)

Overview: Bushing of synthetic rubber to be used with cable clamps for protection of the cable or wires. Generally for use with MS3057 Clamps.
connector accessories Enquire Enquire

CONSTANT FORCE SPRING ADAPTER

Overview: We can provide a unique re-enterable termination system for connecting a cable shielding braid to a circular connector. When used in conjunction with a Heatshrink moulded shape, a sealed environmental termination system is achieved. The main feature is that the termination can be re-entered when required. It is thereby possible to effect repairs to connector pins/sockets without the need to discard any part of the shielding system. Due to the self- tensioning nature of the spring, it provides excellent resistance to vibration and shock. Predominantly used in the Aerospace, Defence and Professional Electronics sectors.
connector accessories Enquire Enquire NYK Component Solutions | 5 Mill Court, The Sawmills, Durley, Hampshire, SO32 2EJ | Tel: +44 1489 861 378 | Email: sales@nykcs.com                         � NYK Component Solutions 2016
Telephone +44 1489 861 378 EMAIL US
connector accessories Enquire Enquire Enquire Enquire Download Brochure Accessories for Circular Connectors
NYK Component Solutions

Accessories

We provide complimentary adapters, protective covers, cable clamps and other connector accessories used primarily in the Aerospace & Defence Industry. Adapters offered range from simple strain relief’s to submersible EMI/RFI shielded backshells for use in harsh environments. Protective covers, used to safeguard connectors while not in use, are available with a wide array of lanyards, eyelets and security rings for complete customization. Our line of MS3057 Cable Clamps are widely used in automotive and heavy industrial markets and are available in a multitude of finishes.

Non-Environmental

Backshells

Overview: Non-Environmental Backshells are used when there is a requirement for additional space between the rear of the connector and the strain relief to allow for cable service loops, jumping, filter networks, etc. They provide a mechanical strain relief for non-environmental applications.

Environmental

Backshells

Overview: Environmental Backshells protect the wiring side of the connector from dust, dirt, moisture and fluids. Almost all recent Military Specification cylindrical connectors are designed so that when the wires are inserted through the grommet, and assuming all holes in the grommet contain either a wire or a sealing plug, the connector will be environmentally sealed once the backshell or strain relief is secured.
connector accessories connector accessories

EMI/RFI Non-

Environmental

Backshells

Overview: Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) generate interference. When strong external noise fields exist, the conductors of a cable act as antennas and pick up the radiated signals. The reception of this interference results in inaccurate or interrupted data transmission. An effective shield prevents the reception of undesired signals as well as confining extraneous signals generated within the cable itself. EMI/RFI backshells enclose the cable in a tightly woven metal braid comprised of wire strands which is then terminated at one or both ends of the cable to ground potential. The termination and grounding of the shield is accomplished by using a suitable connector backshell. A variety of backshell configurations are available for termination of cable shielding
connector accessories
Did you know? Your project will not be complete or meet the requirements of your end customer specifications unless they are provided with the correct compatible accessories. Don’t forget to ask NYK Component Solutions to define and quote the correct accessories for your application.

M85049/128

TERMINATION BANDS

for use with circular

adapters

Overview: We provide Government QPL'd manufactured M85049/128 Termination Bands. These bands are commonly used to attach a braid or a shield to a backshell to provide EMI/RFI shielding. They are available in different lengths, widths, and styles. Our Termination Bands work seamlessly with Daniels Tooling.
connector accessories Enquire Enquire

MS3057 STYLE A, B, C &

D CABLE CLAMPS

Overview: Our MS3057 style cable clamps have MS 'V' Threads that will provide strain relief for MIL-DTL- 5015 Solder (style A) connectors. These clamps are used heavily in the automotive and heavy industrial markets. They are available in a wide variety of finishes including Cadmium Olive Drab, Electroless Nickel, Black or Green Zinc Cobalt and more.
connector accessories Enquire Enquire

PROTECTIVE COVERS

FOR CIRCULAR

CONNECTORS

Overview: Our full line of Protective Covers provide moisture and dust protection for almost every circular mil-spec connector. Available with a wide selection of lanyard types and lengths. Security rings and eyelets of all sizes are also available.
connector accessories Enquire Enquire

MS3420 BUSHINGS

(WITH FLANGE)

Overview: Bushing of synthetic rubber to be used with cable clamps for protection of the cable or wires. Generally for use with MS3057 Clamps.
connector accessories Enquire Enquire

CONSTANT FORCE

SPRING ADAPTER

Overview: We can provide a unique re- enterable termination system for connecting a cable shielding braid to a circular connector. When used in conjunction with a Heatshrink moulded shape, a sealed environmental termination system is achieved. The main feature is that the termination can be re-entered when required. It is thereby possible to effect repairs to connector pins/sockets without the need to discard any part of the shielding system. Due to the self-tensioning nature of the spring, it provides excellent resistance to vibration and shock. Predominantly used in the Aerospace, Defence and Professional Electronics sectors.
connector accessories Enquire Enquire

EMI/RFI Environmental

Backshells

Overview: Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) generate interference. When strong external noise fields exist, the conductors of a cable act as antennas and pick up the radiated signals. The reception of this interference results in inaccurate or interrupted data transmission. An effective shield prevents the reception on undesired signals as well as confining extraneous signals generated within the cable itself. EMI/RFI Backshells enclose the cable in a tightly woven metal braid comprised of wire strands which is then terminated at one or both ends of the cable to ground potential. The termination and grounding of the shield is accomplished by using a suitable connector backshell. A variety of backshell configurations are available for termination of cable shielding.
connector accessories Enquire Enquire Enquire Enquire Enquire Enquire Enquire Enquire
NYK Component Solutions 5 Mill Court, The Sawmills, Durley, Hampshire, SO32 2EJ Tel: +44 1489 861 378 Email: sales@nykcs.com  © NYK Component Solutions 2016
T +44 1489 861 378 EMAIL US