Hyperboloid Connectors from IEH

HMM series circuit board connectors

Options: 1.905mm pitch equivalent to Hypertac HPH 58-604 contacts 4,6 and 8 rows Performance: Current Rating: 3* amp continuous (higher ratings may be supported-contact NYK) Insulation Resistance: 5000 megaohms min. – EIA-364-21 & MIL-DTL-55302 (par. 4.5.8) Contact Resistance: 5 milliohms max, - EIA-364-06 & MIL-DTL-55302 (par. 4.5.5) Test Voltage (DWV): 750 VAC RMS @ sea level - EIA-364-20 & MIL-DTL-55302 (par. 4.5.7.1) 250 VAC RMS @ 70,000 ft. Temperature: -65°C to +125°C (-86°F to +257°F) Mating Force: 0.15 lbs. x number of contacts, max. - MIL-STD-55302 (par. 4.5.4) De-mating Force: 0.03 lbs. x number of contacts, min. - MIL-STD-55302 (par. 4.5.4) Contact Life: 100,000 mating cycles – Exceeds MIL-DTL-55302 (par. 4.5.9) Solderability: IPC/EIA J-STD-002, Category 3 Humidity: IAW EIA-364-31, Method IV, except 7A & 7B (not required) Vibration: IAW EIA-364-28 & MIL-DTL-55302 (par. 4.5.10) Shock: IAW EIA-364-27 & MIL-DTL-55302 (par. 4.5.14) Salt Spray: IAW EIA-364-26 & MIL-DTL-55302 (par. 4.5.11) Temperature Cycling: IAW EIA-364-32 & MIL-DTL-55302 (par. 4.5.13)
Hyperboloid Connectors Hyperboloid Connectors
Did you know? In use for over 40 years under the most demanding conditions, Hyperboloid technology has proven itself to be the leading design for integrity and reliability. On avionics platforms, military and commercial aerospace equipment, engine control systems, missiles and torpedo’s, vehicular electronics, satellites and rocket launchers, medical devices, industrial and environmental controls, test equipment, PGA sockets and countless other rugged applications, Hyperboloid has lived up to its promise of the highest reliability connector available. A full article about the benefits of hyperboloid contact connectors can be read here.

HRM series circuit board connectors

Options: 1.905mm pitch equivalent to Hypertac HPH 10-206 contacts 2 and 3 rows Performance: Current Rating: 3* amp continuous (higher ratings may be supported-contact NYK) Insulation Resistance: 5000 megaohms min. – EIA-364-21 & MIL-DTL-55302 (par. 4.5.8) Contact Resistance: 5 milliohms max, - EIA-364-06 & MIL-DTL-55302 (par. 4.5.5) Test Voltage (DWV): 750 VAC RMS @ sea level - EIA-364-20 & MIL-DTL-55302 (par. 4.5.7.1) 250 VAC RMS @ 70,000 ft. Temperature: -65°C to +125°C (-86°F to +257°F) Mating Force: 0.15 lbs. x number of contacts, max. - MIL-STD-55302 (par. 4.5.4) De-mating Force: 0.03 lbs. x number of contacts, min. - MIL-STD-55302 (par. 4.5.4) Contact Life: 100,000 mating cycles – Exceeds MIL-DTL-55302 (par. 4.5.9) Solderability: IPC/EIA J-STD-002, Category 3 Humidity: IAW EIA-364-31, Method IV, except 7A & 7B (not required) Vibration: IAW EIA-364-28 & MIL-DTL-55302 (par. 4.5.10) Shock: IAW EIA-364-27 & MIL-DTL-55302 (par. 4.5.14) Salt Spray: IAW EIA-364-26 & MIL-DTL-55302 (par. 4.5.11) Temperature Cycling: IAW EIA-364-32 & MIL-DTL-55302 (par. 4.5.13)

HYPERKINETIC high speed circuit board

connectors

Options: VITA and cPCI footprints 10+ Gbps data rate For 3U or 6U boards Performance: Hyperkinetic Electrical Specifications: • Data Rate: 10+ Gbps • Differential Impedance: 100 ohms • Differential Insertion Loss: -9 dB up to 10 GHz (20 Gbps) • Far End Crosstalk: -34 dB up to 5 GHz • Near End Crosstalk: -32 dB up to 5 GHz • Signal Contacts: 3.5 amp • Power Wafer: 12 amps per wafer at 30°C T-Rise • Compliant Pin to Plated Through Hole Resistance: 1 milliohm max • Dielectric Withstanding Voltage: 500 volts RMS • Insulation Resistance: 1000 megaohms Hyperkinetic Mechanical Specifications: • Signal and Ground Contact: • Insertion force per contact: 1.6 oz max, 0.9 oz typical • Extraction force per contact: 1.2 oz max, 0.7 oz typical • Durability: 500 cycle minimum • Number of contacts: 9 per wafer • Number of wafers: 40 for 3U; 104 for 6U; custom upon request. • Contact resistance: <8 milliohms per contact • Wafer pitch: 1.8 mm • Slot pitch: 20.30 mm Hyperkinetic Environmental Specifications: • Temperature: -55°C to 125°C • Temperature Life: 1000 hours at 125°C
Hyperboloid Connectors Enquire Enquire Hyperboloid Connectors

HMK series circuit board connectors

Options: 2.54mm pitch, frop-in replacement to Hypertac HDP/HPF and compliant to BS 9525 17-490 contacts 2,3,4 and 5 rows Performance: Current Rating: 4 amp @ 30°C Rise (higher ratings may be supported--contact NYK) Insulation Resistance: 106 megaohms min. - EIA-364-21 & MIL-DTL-55302 (par. 4.5.8) @500 VDC Contact Resistance: 5 milliohms max, - EIA-364-06 & MIL-DTL-55302 (par. 4.5.5) Breakdown Voltage between contacts: 1400V RMS min Dielectric Withstanding Voltage: 1050V RMS min Temperature: -55°C to +125°C (-67°F to +257°F) De-mating Force: 0.30 to 2.00 oz. per contact x number of contacts - MIL-STD- 55302 (par. 4.5.4) Contact Life: 100,000 mating cycles - Exceeds MIL-DTL-55302 (par. 4.5.9) Solderability: IPC/EIA J-STD-002, Category 3 Humidity: IAW EIA-364-31, Method IV, except 7A & 7B (not required) Vibration: IAW EIA-364-28 & MIL-DTL-55302 (par. 4.5.10) Shock: IAW EIA-364-27 & MIL-DTL-55302 (par. 4.5.14) Salt Spray: IAW EIA-364-26 & MIL-DTL-55302 (par. 4.5.11) Temperature Cycling: IAW EIA-364-32 & MIL-DTL-55302 (par. 4.5.13)
Hyperboloid Connectors Enquire Enquire Hyperboloid Connectors

Contacts

Options: Higher current carrying capacity and lower insertion force than standard sockets. Any terminations available. Easily customised for your application.
Hyperboloid Connectors Enquire Enquire Hyperboloid Connectors

Custom hyperboloid solutions

Options: Customised hyperboloid interconnects built to your specifications. Power and / or signal connectors. Ruggedised versions of COTS connectors
Hyperboloid Connectors Enquire Enquire Hyperboloid Connectors NYK Component Solutions | 5 Mill Court, The Sawmills, Durley, Hampshire, SO32 2EJ | Tel: +44 1489 861 378 | Email: sales@nykcs.com                         � NYK Component Solutions 2016
Telephone +44 1489 861 378 EMAIL US
Enquire Enquire Enquire Enquire Hyperboloid Connectors Hyperboloid Connectors
IEH provides high reliability solutions for PCB and custom applications via an exclusive UK franchise with NYK Component Solutions. Full scheduled stock facility. Small batch quantity supply. OEM supported pricing. Fully accredited AS9120-REV A approved. Every IEH Hyperboloid connector provides: high reliability and immunity from shock and vibration. Low mating force and contact resistance. High density. Low mass. High current carrying capability. Low cost of ownership. The HYPERBOLOID contact is an advanced design that satisfies performance requirements previously considered impossible. Unique in concept, it is used in connectors having the highest standards of performance. The distinguishing feature of the HYPERBOLOID socket is the hyperboloid-shaped sleeve formed by straight wires strung at an angle to the longitudinal axis. When the pin is inserted into this sleeve, the wires stretch, well within elastic limits, to accommodate it. In so doing, the wires wrap themselves around the pin providing a number of continuous line contact paths A full article about the benefits of hyperboloid connectors can be read here.
Download Brochure Hyperboloid Connectors

Hyperboloid Connectors

from IEH

IEH provides high reliability solutions for PCB and custom applications via an exclusive UK franchise with NYK Component Solutions. Full scheduled stock facility. Small batch quantity supply. OEM supported pricing. Fully accredited AS9120-REV A approved. Every IEH Hyperboloid connector provides: high reliability and immunity from shock and vibration. Low mating force and contact resistance. High density. Low mass. High current carrying capability. Low cost of ownership. The HYPERBOLOID contact is an advanced design that satisfies performance requirements previously considered impossible. Unique in concept, it is used in connectors having the highest standards of performance. The distinguishing feature of the HYPERBOLOID socket is the hyperboloid-shaped sleeve formed by straight wires strung at an angle to the longitudinal axis. When the pin is inserted into this sleeve, the wires stretch, well within elastic limits, to accommodate it. In so doing, the wires wrap themselves around the pin providing a number of continuous line contact paths

HMM series

circuit board

connectors

Options: 1.905mm pitch equivalent to Hypertac HPH 58-604 contacts 4,6 and 8 rows
Hyperboloid Connectors Hyperboloid Connectors
Did you know? In use for over 40 years under the most demanding conditions, Hyperboloid technology has proven itself to be the leading design for integrity and reliability. On avionics platforms, military and commercial aerospace equipment, engine control systems, missiles and torpedo’s, vehicular electronics, satellites and rocket launchers, medical devices, industrial and environmental controls, test equipment, PGA sockets and countless other rugged applications, Hyperboloid has lived up to its promise of the highest reliability connector available. A full article about the benefits of hyperboloid contact connectors can be read here.
NYK Component Solutions

HRM series circuit

board connectors

Options: 1.905mm pitch equivalent to Hypertac HPH 10-206 contacts 2 and 3 rows

Contacts

Options: Higher current carrying capacity and lower insertion force than standard sockets. Any terminations available. Easily customised for your application.

Custom

hyperboloid

solutions

Options: Customised hyperboloid interconnects built to your specifications. Power and / or signal connectors. Ruggedised versions of COTS connectors

HMK series circuit

board connectors

Options: 2.54mm pitch, frop-in replacement to Hypertac HDP/HPF and compliant to BS 9525 17-490 contacts 2,3,4 and 5 rows

HYPERKINETIC

high speed circuit

board connectors

Options: VITA and cPCI footprints 10+ Gbps data rate For 3U or 6U boards
Hyperboloid Connectors Hyperboloid Connectors Hyperboloid Connectors Hyperboloid Connectors Hyperboloid Connectors Hyperboloid Connectors Hyperboloid Connectors Enquire Enquire Enquire Enquire Enquire Enquire Enquire Enquire Enquire Enquire Enquire Enquire
NYK Component Solutions 5 Mill Court, The Sawmills, Durley, Hampshire, SO32 2EJ Tel: +44 1489 861 378 Email: sales@nykcs.com  © NYK Component Solutions 2016
T +44 1489 861 378 EMAIL US