Regular industry and product news from the team at NYKCS. Contact us for further information.

band together for savings ESUK Feb 19

Band together for savings – Electronic Sourcing UK, Feb 2019

By Jon Worley | Feb 7, 2019

Termination bands are the subject of an article in the February 2019 edition of Electronic Sourcing UK magazine. Read on below or visit Electronics Sourcing to view the full digital publication. An ability to source a compatible connector, backshell and termination band in one place could reduce your supplier base and the costs…

Read More
integrated backshell d38999 iii

Integrated Backshell MIL-DTL-38999 Series III Connectors

By Jon Worley | Dec 10, 2018

D38999 Series III circular connectors are now available with an integrated backshell from NYK Component Solutions. Benefits Built to conform with the MIL-DTL-38999 series III specification they are fully interminable and interchangeable with d38999 III products. These Conesys connectors offer the performance advantages of D38999 with the following benefits over…

Read More
in house assembly short lead time

On target for defence – Electronic Sourcing UK, Nov 2018

By Jon Worley | Nov 20, 2018

An enhanced quality system, high levels of stock and the ability to assemble product on demand help NYK Component Solutions target aerospace and defence requirements The article ‘On target for defence’ in the November 2018 edition of Electronics Sourcing UK magazine describes how NYK Component Solutions has focused on quality…

Read More
when the going gets tough

When the going gets tough – Electronic Sourcing UK, Sept 2018

By Jon Worley | Oct 2, 2018

  Best of British The ‘Best of British’ article in the September 2018 edition of Electronics Sourcing UK magazine describes NYK Component Solutions value add capability for d38999 and explains how the business is organised to supply approved interconnect product in short timeframe. Purchasers looking to specify approved product for…

Read More
Black Zinc Nickel MIL-DTL-38999

Development of MIL-DTL-38999

By | Aug 7, 2018

A brief history In the 1930’s the U.S. Department of Defense developed the original specifications for a military grade Circular Connector to meet the demands of severe aeronautical and tactical applications. These were known as Type “AN” (Army-Navy) and they set the standard for the range of military circular connectors…

Read More
Going around in circles Electronic Sourcing Aug 18

Going around in circles – Electronic Sourcing UK, Aug 2018

By Jon Worley | Aug 7, 2018

  NYK Component Solutions cuts through the complexity In the article ‘Going around in circles?’ featured in the August 2018 edition of Electronics Sourcing UK magazine NYKCS explains how to navigate the complex world of Circular Connectors. Electrical plugs and sockets with a circular housing and multiple contacts are used…

Read More
Circular Connector Terminology Guide

Circular Connector Terminology Guide

By Jon Worley | Jul 31, 2018

  Circular Connector Terminology This document provides definitions of common terms used in the Circular Connector industry and is intended as a guide for engineers and buyers. You can download this document as a handy pdf guide here. Accessories – Items such as cable clamps, backshells, gaskets or any other…

Read More
Hermetic circular connector

Hermetic circular connectors for severe environments

By Jon Worley | Jul 24, 2018

  Hermetic connectors from AMETEK NYK Component Solutions (NYKCS) are the exclusive European Franchise Distributor of AMETEK Interconnect Technologies extensive range of hermetic Circular Connectors and are approved to supply: MIL-DTL-38999; MIL-DTL-83723 Series III; MIL-DTL-26482 Series I and II; MIL-DTL-26500; EN299Y + YE; Hermetic connectors provide an airtight seal and…

Read More